IMC Teddy UVC2226 Sterilizer Cabinet never used out if box #2052

never used out of the box 

IMC Teddy UVC2226 Sterilizer Cabinet

UVC-2226 STERILIZER CABINET INSTALLATION GUIDE

Tools/Materials Needed Mount UVC-2226 cabinet on wall with screws. (Hardware not included.) See Figure 1. Place washed utensils inside the cabinet and close door.

Plug 120V cord to standard outlet. See Figure 2. Germicidal ultra violet light is automatically energized when the door is closed.

Red pilot light turns on and sterilizing operation begins. See Figure 3. When the green (ready) light turns on, sterilization is complete and the utensils can be removed from the cabinet. See Figure 4. • UVC-2226 Sterlizer Cabinet • Set of Screws • Drill with 3 ⁄32” Bit

If you experience any problems, please use the following troubleshooting guide: 1) Make sure light bulb is properly installed. 2) Make sure 120V cord is plugged in. 3) Ensure standard outlet is receiving electricity. 4) If after performing steps 1-3 UV lamp light does not light, replace bulb. 5) If red or green indicator lights malfunction, discontinue use. 6) Call IMC/Teddy for lamp and bulb replacement & pricing