STERO SCT-44 CONVEYOR Dishwasher machine dish machine #1842

STEROSCT-44 CONVEYOR SERIES

SCT-44, SCT-44-CSA, SCT-44-10 SCT-44 CONVEYOR SERIES: 20” RACK CONVEYOR WASHER The Finest Washers… With Center-Fed Manifolds

STERO’S Single-Tank SCT-44 Series Rack Conveyors are offered with either High Temperature or Chemical Sanitizing final rinse. Wash manifolds are positioned in the center of the tank. SCT-44:

SCT-44-CSA: Eliminates the need for a booster heater by chemically sanitizing with a low-temperature final rinse. SCT-44-10: 10″ longer than the SCT-44, resulting in greater separation between the wash manifold and the final rinse. Where space permits, this is advantageous for the operator as it gives a thorough rinse and minimizes the possibility of cross-contamination in the wash water/final rinse inter-mix.

STANDARD FEATURES Design: Single tank 20″ rack conveyor warewasher—44″ in length with a power wash and a final sanitizing rinse. Flexible strip curtains at each end control water and heat. One large inspection door allows easy access to interior of machine for cleaning and maintenance. Construction: Tank and hood are formed from 304/18 – 8 No. 4 mill finish stainless steel. Fully welded with a minimum of bolt together construction. Frame is heavy-duty stainless steel flat stock construction conforming to NSF Standard No. 3. Machine is supported by enclosed stainless steel feet. All internal piping, fittings, risers and manifolds are stainless steel. Power Wash: STERO’s unique stainless steel manifolds are center-fed, fitted with stricture free jets with directional vanes and can be easily removed without tools. Center-fed manifolds distribute an even flow of wash water over the entire perimeter of the rack, ensuring consistent results. A 2 HP, 1750 rpm motor and pump distribute 300 GPM of detergent water. Power wash has extended stainless steel shafts with packless ceramic seals. The pump has easily removable inspection plates—front and end—and is selfdraining. Stainless steel perforated strainer pans cover the tanks. Automatic Fill: Fills the machine at the push of a button and keeps it full during operation. In the event of low water in the tank, the system will automatically re-fill to the proper level. Automatic Start: Rack activated switch starts conveyor and pumps eliminating the need for a manual start. Automatic Shut Down: Shuts down machine operation during idle periods. Stainless Steel Front En

DISHWASHER, 2.25 HP, 208V, 7.6 AMPS, 60HZ, 3 PHASE